What pipe beveling method is right for your application? How are weld ready bevels created? What kinds of bevels can be produced by hand? With a machine? In our newest download, the Guide to Beveling Pipe, we cover all the basics of pipe beveling including:
- Types of bevels
- Beveling methods
- Choosing the right method
When welding two pieces of pipe together the ends of the pipe must be properly prepared to obtain the best possible weld joint. The pipe or tube is typically beveled on the ends to facilitate the joining of the two pieces by forming a "V" between them.
This "V" can have different angles, forms, and other characteristics depending on the size of the pipe, the wall thickness, material grade, and method of welding.
The most common weld bevel is a straight 37-1/2 degree bevel measured off of the face of the pipe. This forms a 75 degree angle between the two pieces of pipe and there is normally a “land” or small flat that is to eliminate the thin or "feather machined or ground on the end edge."
The cheapest, dirtiest, and least safe method is to use a hand grinder to grind the bevel on the pipe. This is time consuming and requires a skilled operator to produce the bevel accurately. Forms such as J-Bevels cannot be produced by hand beveling.
Other methods include automated beveling machines, which are safer and cost effective. What method of pipe beveling suites your application?
Download our free guide to learn more about pipe beveling methods and the specifications needed to choose the right beveling method.
